Categories Electrostatic Painting

What Is Electrostatic Painting and Where Can It Be Used?

Parts suspended on an overhead conveyor belt for electrostatic painting

Electrostatic painting applies paint to metal surfaces and uses an electrical charge to bind the paint to the surface. Electrostatic painting contractors in Davie FL opine that the process is better than powder coating in many ways as it is more efficient and gives a better finish.

How Electrostatic Painting Works

The painting process is relatively simple. The first step is to clean the metal surface. This will remove any dirt, grease, or other debris that could prevent the paint from adhering to the surface. Next, apply a primer to the metal surface. Electrostatic painting contractors in Davie FL say that poorly prepared surfaces can cause the paint to peel or chip over time.

Once the primer is dry, the paint is applied with the electrostatic paint gun. When using an electrostatic paint gun, it is important to hold the gun at a certain distance from the surface that you are painting. Paint can be either water-based or oil-based paint. Water-based paint is typically easier to clean up and is less likely to cause health problems if inhaled. However, oil-based paint will provide a more durable finish that is less likely to chip or peel over time.

Once the paint has been applied, it must dry. The drying time will vary depending on the type of paint that was used as well as the temperature and humidity of the room. In most cases, allowing the paint to dry overnight is best.

Where Can Electrostatic Painting Be Used?

Metal surfaces that are difficult to reach with a brush or roller can be painted with electrostatic paint. This includes car parts, furniture, appliances, and more. Electrostatic painting in Florida is also used to apply a thin coat of paint to a large surface area, such as a wall or ceiling. Large surfaces require special attention to ensure an even coat of paint. If done correctly, painting can provide a long-lasting and durable finish.

Electrostatic painting in Florida can be used on both interior and exterior surfaces. When painting exterior surfaces, it is important to use paint resistant to weathering and UV light. Choose the right type of paint for the project and the suitable primer. Different primers are designed for different kinds of surfaces. The A-1 Tropic Painting & Waterproofing team can help you choose the right paint for your project.

Electrical enclosures, such as panel boards and switchgear, often must be painted to protect against corrosion. This type of painting is an effective way to provide a durable finish that will last for years.

If you are looking for an efficient and long-lasting way to paint metal surfaces, electrostatic painting in Florida is a great option. With proper preparation, this type of painting can provide great results and a long-lasting finish. Contact us at A-1 Tropic Painting & Waterproofing to get professional advice on the right paint and primer.

Categories Electrostatic Painting

Electrostatic Painting and its Benefits

Company using electrostatic painting

Electrostatic painting is a form of kinetic art that uses electrostatic paint to coat surfaces, especially metals. The surface to be painted contains a charge opposite to the one on the paint particles, thus coating the surface properly. Any oil-based paint can be used in this type of painting. It is one of the fastest painting procedures that have been developed in the automotive industry. Read on to learn why this should be your go-to choice.

Even Paint Coating

Electrostatic paint is distributed evenly on the surface, thus improving its color appearance. And when you work with the right electrostatic painting contractors in Davie, FL, you can rest assured that the paint will be evenly coated. Consequently, the paint evenness provides easy touch-ups in case the paint fades with time or is chipped off. It makes it easy to clean the painted surface and have it look presentable and new all the time.


Our electrostatic painting company based in Florida has tested and realized that electrostatic paint does not crack or fade over time. Through electrostatic painting services in Florida are provided by companies such as A-1 Tropic Painting & Waterproofing, it’s evident that these electrostatic paints are non-absorbable because they have resin. Resin is a substance that is reliably and easily applied without the use of adhesives or water, which means the paint can last for decades in outdoor applications. The paint does not conduct electricity and will therefore not generate power when exposed to electrical current. In addition, the paint can be removed and replaced after a long time without destroying the surface.

Cost Effective

Applying electrostatic paint does not require sanding or pre-coating of the surface before painting. This reduces the costs that may be incurred while getting the surface ready for the paintwork. As electrostatic painting contractors at Davie, FL, we offer top-notch services at affordable prices. Additionally, we provide warranty covers to our clients in case their paintwork does not meet the expected standards. In addition, as an electrostatic painting company contracted for the paintwork, we use less volatile organic compounds. Since there’s no over spraying paint, it simply means that less amount is spent on paint.

It Is Environmentally Friendly

This paint revokes airborne dust by as much as 98%, which means significantly less dust in your home or office building. It also repels water, making it great for humid climates and protecting wood against water damage. Not to forget the fact that it’s easy to clean, surface dirt wipes away easily with a damp cloth or sponge.

The chemical paint is broken down into tiny particles, so small that they are harmless to human beings and animals, for instance, pets when used as an interior finish. Moreover, the paint emits no odor when applied to a wall, unlike most paints which emit fumes from the liquid components of their chemical makeup.

Are you searching for excellent electrostatic painting services in Florida? Look no further because our electrostatic painting company offers the best services to give an elegant new look to all your appliances and glassware. Contact A-1 Tropic Painting & Waterproofing for all your electrostatic painting needs.

Categories Electrostatic Painting

Where is Electrostatic Paint Used and What Are Its Advantages?

As the owner of a commercial building or a high-rise, you’ll know how tedious, time-consuming, and expensive it can be to get your building exterior painted, especially the metal parts of the building. Over time, paint chips off or gets damaged by rain, wind, and sun. A great way to avoid this is by trying out Electrostatic Painting. Say goodbye to rust and paint wastage too.

What is Electrostatic Paint?

Electrostatic painting is when electric particles are positively charged by a spray gun and transferred onto a negatively charged surface. The process works because of the principle that particles that have a negative charge attract those particles that have a positive charge, whereas particles with a positive charge repel other positively charged particles. 

The paint is in a spray bottle with a positively charged electron in the nozzle. This electron charges the paint particles. When the particles all have a positive charge, they follow the principle we outlined and end up repelling each other. They break apart from each other, resulting in an even spray of the paint. Paint particles with a positive charge are attracted to surfaces with a negative charge, and the paint is drawn towards those surfaces. Once the surface is fully coated, it stops attracting more paint.

Where Can You Use Electrostatic Paint?

Electrostatic paint can only be used on grounded metal surfaces. It is used to spray paint onto large surfaces and is difficult to reach places. 

The electrostatic paint process is used to enhance and restore the metal parts of buildings. In a commercial building, this would include windows, metal fences, doors, balconies, entrance gates, streetlight poles, pedestrian fences, catwalk railings, staircase railings, and safety railings, among other metal surfaces.

What are the Advantages of Electrostatic Painting?

Electrostatic painting offers you several advantages over traditional paint. These advantages include:

Faster Drying Time

The coating of electrostatic paint can cure overnight. To fully cure it may take between 12 to 24 hours, but the great thing is that you can touch a painted surface after a few hours without worrying about ruining the paint job. For convenience, you can get the painting done on the weekend and then go about your business as usual on Monday morning. 

Reduced Overspray

Electrostatic paint has a transfer rate of 98%. This means that almost all of the paint coming out of the spray nozzle reaches the desired surface, and less than 2% of the paint is wasted. Unlike regular spray paint, electrostatic paint does not get sprayed in every direction. The paint only adheres to grounded or negatively charged surfaces. It can also reach small crevices and corners where a paintbrush would not reach.

Lower VOC Emissions 

Most paints and varnishes contain Volatile Organic Compounds (VOCs). VOCs are used to preserve the paint and make it resistant to corrosion. However, VOCs can be dangerous for your health and cause air pollution. Because of the reduced overspray of electrostatic paint, the amount of VOCs emitted into the air is also reduced. 


Electrostatic paint is highly durable and makes metal surfaces resistant to harsh environmental conditions. You won’t need to worry about your metal surfaces rusting or corroding when they have a coat of electrostatic paint. The paint holds up well against water, sun, and wind.  

A Factory-like Finish 

The quality of the paint job is excellent. This is partly because of the nature of the paint. It coats grounded or negatively charged surfaces completely and evenly. Once a surface is fully covered, the paint is then attracted to any corners or crevices left uncoated. This leads to a factory-like finish of the paint. 

A More Cost-Effective Solution 

Because there is no overspray, paint does not get wasted. It also requires less clean-up. The paint is also quite durable and lasts for many years. All of this together means that electrostatic painting is a much more cost-effective solution as compared to traditional painting. 

Resistant to Cleaning Solutions

You can use most chemical cleaning solutions to clean your metal surfaces without worrying about the paint becoming damaged or worn. 

A-1 Tropic Painting & Waterproofing – South Florida

Electrostatic painting has many advantages, but it can only be applied by experienced professionals. If you are looking for such professionals, A-1 Tropic Painting & Waterproofing is the company for you. 

 A-1 Tropic Painting & Waterproofing is a commercial painting contractor in Florida and has been in the industry for over 35 years. We provide services such as commercial painting, commercial waterproofing, epoxy flooring, commercial sealing, and electrostatic painting. 

Get in touch with us by calling (888)367-2706 or visit our website for more information on our services: You can even fill out a form on our website for a free quote.

Categories Electrostatic Painting

How Electrostatic Painting gives You More for Your Money?


Painting is a costly and difficult challenge by scraping off the old coat and applying a new one. The costs for paint are consistent every couple of years with the constant repurchasing to get the right materials.

These challenges are compounded by the fact that paint prices are increasing because of supply chain issues.

Electrostatic painting is a new solution that gives you more for a quality finish. Here are some of the reasons why electrostatic painting is a better value and superior to the other options.

Electrostatic versus Traditional Painting

Electrostatic painting positively charges ions in the paint coming out of the electrostatic paint gun. These ions react to the negative ions on the surface, causing the paint to go deeper into the material. The charge sticking to the particles forms chemical bonds and fastens to the surface you are painting.

The cure time is 12 to 24 hours, but you can touch the electrostatic paint on the surface in a few hours.  After this is when you can use the surface like usual and not worry about performing constant maintenance.

Traditional painting does not offer this and applies the paint’s ions with the other negative ones on the surface. These compounds are weaker and the paint will look good, but the coats will not last. You will have to go back in a couple of years and repaint everything to maintain the desired look and protect the material.

The cure time is 24 to 48 hours, but you want to wait a few days before returning to normal usage. After this timeframe is when the coat is strong enough to withstand wear and tear.

We recommend using electrostatic paint to get a better job and have a protected surface against the elements.

 A-1 Tropic Painting & Waterproofing is the contractor that uses electrostatic solutions to get the best results. We are experts in electrostatic paint to give you a protected surface against the elements that lasts.

Lower Waste

You will have less waste when using electrostatic paint on any surface, such as concrete, masonry, metal, or wood. The charged particles connecting with the negative ions on the surface create less waste. You see more of the paint sticking to the surface and less going onto other areas or the ground.

For example, combining positive and negative ions is what creates bonds similar to two magnets. The attraction makes the combined elements stronger merging to develop a new atom in the paint that withstands the elements. More paint goes onto the surface versus less is going to the surrounding areas.  

We recommend using electrostatic paint to decrease your waste and ensure that more go onto the target surface.

At A-1 Tropic Painting & Waterproofing, will restore your surface to a new state; the paint does not carry germs, and has minimal overspray. You have an excellent solution that gives you the best results on your paint job.


One of the challenges with traditional painting is you will spend several hours doing maintenance and repainting. The costs for materials and labor over time increase your expenses for maintaining the surface.

Electrostatic paint lasts longer, and you don’t have to worry about repainting every couple of years. Instead, the paint can last from 10 to 15 years before you want to do maintenance and bring everything back to the original state.

You save time with the electrostatic paint, and don’t worry about repainting the surface.

We recommend this solution, as you do your painting once and never worry about the paint lasting.

A-1 Tropic Painting & Waterproofing is the best contractor in South Florida for electrostatic paint. We have the experience, knowledge, and professionalism to get the job done right the first time.

Even Finish

Painting with a paint sprayer will never give you an even finish, as the paint builds up in pockets. Electrostatic paint sprays out evenly to provide you with a smooth and crisp finish.

We recommend this solution, as you have an even surface after just one coat with an excellent look and feel.

A-1 Tropic Painting and Waterproofing can help with our 35 years of experience in working with customers throughout South and Central Florida. We will give your project an even finish with the least amount of buildup.

Get the Most for Your Money

These are some reasons why electrostatic painting gives you more and is a better choice. Call A-1 Tropic Painting & Waterproofing today at 888-367-2706 and ask for your free quote.

We are the number one commercial painting contractor in South Florida and are located near the Plantation Acres North Park

Categories Electrostatic Painting

How Can Electrostatic Painting in South Florida Make Things Easier on Your Next Painting Project?

electrostatic painter central florida

One of the challenges with any commercial painting project is the durability of the work will not last. The sun, wind, and rain will cause the paint to fade and chip every two to three years. These issues lead to constantly repainting and sealing the surface to protect against the elements. 

Technology is making changes by creating solutions that are longer-lasting, more durable, and cost-effective. Electrostatic painting in South Florida is one of the best ways to ensure that your paint job lasts. 

The secret is charging the paint molecules as it leaves the gun and sticks to the surface. The effects are that this form of painting is considerably stronger and lasts longer than traditional solutions. You don’t have to worry about constantly repainting the surface, and you will make things easier by using these techniques on your next project. 

The Coating

Typically, power coatings are some of the strongest paint materials to enhance the durability and protection of the paint. However, most of these applications are common in industrial settings, and using these substances for your projects was difficult. 

In the last several years, technology has made powder coatings available through electrostatic painting in South Florida. These solutions are flexible and applied to any surface to bring out the beauty. 

For example, suppose you are working on a metal garage door with peeling paint and rust. Electrostatic painting makes everything look new by going deep into the molecules of the metal. The rust spots disappear, and you have an extra layer of protection that can withstand the elements. 

A-1 Tropic Painting & Waterproofing can help with our knowledge and specialization in electrostatic painting. We are your premier painting contractor in South Florida and will make your project look new. 

Paint Loss

Paint loss is a problem for any project from over-spraying the surface and the paint dropped on the ground.

Statistics from the Pacific Northwest Pollution Prevention Resource Center find that $83 out of every $100 is lost to over spraying. 

Many times, several coats are applied to get the density and look to create a professional finish. The challenge is over-spraying and dropped paint on other surfaces increases the costs and requires more materials. When you are using a paint sprayer, some of the paint will also dissipate into the air. 

Electrostatic painting charges the paint with positive molecules and makes the paint heavier when leaving the gun. The paint goes on smoother and with fewer coats than the traditional solutions available in the marketplace. You save money and paint by using electrostatic solutions to get a professional look on the first coat. You don’t have to paint, wait for everything to dry, and apply multiple coats. 

Electrostatic painting creates less paint loss, and you will see the paint stick to the surface and avoid over-spraying. 

A-1 Tropic Painting & Waterproofing uses electrostatic painting on some of the different commercial structures throughout the area. Take a drive by the Triton Condominiums and see how this paint gives the property an excellent look and feel. 


Electrostatic painting does not save you money when you compare purchasing the paint with other options up front. However, the value comes from the application of the paint with less paint loss and durability. You will not have to spend money on the paint for many years or the labor costs of applying the paint are lower. 

The value comes from what you save over time by not constantly repainting the same surface. The paint application paint is less, usually one coat, and you do not worry about buying two to three extra cans. 

A-1 Tropic Painting & Waterproofing gives you a professional look and feel on your projects. We use electrostatic painting on different surfaces, including railings, balconies, windows, door frames, and storefronts. We are experts in this painting and no job is too big or small for us. 


We can customize the electrostatic paint to match any surface and give you a quality finish. You never worry about mixing or matching issues with this solution and your materials will have a great look and feel. 

A-1 Tropic Painting & Waterproofing can match the electrostatic paint to anything you have on your property. 

Get the Job Done Right the First Time

Electrostatic painting in South Florida is the go-to solution for doing things right the first time. Call A-1 Tropic Painting & Waterproofing today at 888-367-2706 and let us help you do a great job on your next project. 

We are off North Flamingo Road, near the Plantation Acres North Park and the Plantation Equestrian Center.